Brandon Whiting

A homeowner in Duluth, MN reached out to DBS looking for an updated finish to their entire basement area. Our Design Specialist recommended our Total Basement Finishing™ service. Our Production Manager, Brandon Whiting, made sure the entire basement was given a clean touch with the use of EverLast™ Basement Wall Panels and new wood flooring. With the completion of this project, the homeowner can now enjoy a more fresh and comfortable living space. 

These Saint Paul, MN homeowners wanted to make better use of their basement. Living in an older house in Saint Paul, they were interested in our system because of its insulation and water resistant qualities. 

DBS Total Basement Finishing Design Specialist Denny Meintz visited the home and provided a free, no-obligation estimate for the basement finishing project, keeping in mind the family's vision for the space.  It was determined that EverLast™ Basement Wall Panels would be installed along the perimeter in the basement, along with MillCreek Flooring™, and recessed lighting.

A DBS Carpenter and crew successfully performed some demolition, and provided additional insulation by using spray foam on the basement rim joists. They then installed the products mentioned above, completing base electrical, and installing outlets, switches, and jacks. The homeowners also opted to go for a SaniDry™ Sedona dehumidifier in the space to keep relative humidity at a comfortable level in the space.

This family now has a beautiful, custom addition to their home to enjoy!

This homeowner in Saint Paul, MN wanted to address the insulation problem in their basement. The space was continuously too hot or too cold depending on the season, making it unusable.

Design Specialist Henrik Makitalo assisted the owner by conducting a free, no-obligation estimate. After a careful inspection, Henrik recommended the installation of SprayFoam insulation. 

Foreman Brain Whiting led the installation of this project with help from a team. First, the team used the SprayFoam insulation to air seal any cracks or holes in the walls that may be allowing unwanted airflow to enter or exit the home. After air sealing, they installed the insulation across the entirety of the wall to create the insulation barrier, as well as a moisture barrier.

This homeowner can now relax in their temperature appropriate home. 

A homeowner Minneapolis, MN reached out to DBS looking to give their basement a total makeover. The area was unfinished and the owner had a Design Specialist come out to look and provide them with a free, no-obligation estimate for the Total Basement Finishing™ service. It was concluded that the basement would be finished with new floor tiles and mold-resistant wall panels, as well as a change in ceiling tone. The end results were beautiful, and the homeowner can now enjoy a more healthy and comfortable basement living area. 

This typical Minneapolis, MN basement was partially finished. However, it was outdated and had issues with moisture. Wanting to transform their basement with moisture-resistant materials, they contacted DBS.

DBS Design Specialist Jason Swanson visited the home and gave a free estimate for the basement finishing project. This included installing some waterproofing infrastructure to help eliminate water issues. Our team installed mold and moisture-resistant flooring, wall panels, and finishing trim. 

After demolition of the existing basement wall panels and flooring, our team installed wiring, plumbing, lighting, and ductwork infrastructure. From there, our team installed our Total Basement Finishing™ system to transform this space from basement to beautiful!

A homeowner in Minneapolis, MN was looking to revamp their basement area and reached out to DBS regarding our basement finishing service. After discussing with our Design Specialist, it was determined that our crew would install ZenWall™ panels, which contain compressed fiberglass insulation and faced with tan vinyl. For flooring, the crew installed ThermalDry® Basement Floor Tiles which is equipped with a thermal barrier, making the flooring 8-10 degrees warmer than tradition ceramic or vinyl tile. The end results of the project can be viewed here.

A homeowner in Golden Valley, MN was looking to have their basement walls refinished, and reached out to DBS for suggestions. The basement contained a traditional drywall finish, which is less resistant to mold and other damages than what DBS has to offer. Our Design Specialist suggested we install EverLast™ Wall Restoration. This product is a finished wall addition that is made of up mold, moisture, and mildew-resistant material with a transferable warranty. This is an ideal solution to creating a more healthy, safe and comfortable basement environment. The results of the finishing project can be seen here. 

A family in Brooklyn Park, MN was looking to have their basement completely finished, and they reached out to DBS for some assistance. It was proposed to have all new flooring, walls, and ceiling panels installed, and DBS used several different products to get the job done. Our crew installed the EverLast™ Basement Wall Panels comprised of 100% mold-resistant material, as well as ThermalDry® Insulated Floor Planking. These products come with a 50-year transferrable warranty and are ideal for any type of basement finishing project. They feature characteristics that can not be found in traditional drywall. The results of the bedroom project can be seen here.

A home in Brooklyn Park, MN had a basement that was in need of a new appearance. The owner reached out to DBS, and a Design Specialist went to provide them with a free, no-obligation estimate for the basement finishing service. It was determined that DBS would completely update the unfinished area with new flooring, carpet, wall panels, doors, and drop ceiling tiles. Many of the products are provided exclusively through DBS and come with a transferable warranty, making them ideal to have installed in any unfinished basement. The results of the main living area can be seen here. 

This Plymouth, MN homeowner wanted to capitalize on the square footage in the basement. Their dream was to have another living room, a home gym, and office space. Having worked with DBS in the past to correct a bowing wall and install a waterproofing system, they wanted to finish their basement with the DBS water-resistant system.

DBS Design Specialist Jason Swanson visited the home for a free, no-obligation estimate and came up with a custom plan that would incorporate this homeowner's wishlist.  DBS Carpenter Donny Whiting lead the install on this basement finishing project. The team also installed EverLast™ wall panels - the insulated version lined the outside walls and uninsulated for the inner walls. These wall panels are hung via a metal framing system, making them incredibly durable and stronger than drywall.

They installed our ultra-durable, scratch-resistant MillCreek™ flooring throughout the basement. This mahogany color is UV-resistant and provides a thermal break from the cold basement floor.

This owner was happy with the work done and now has a healthy, safe, and comfortable basement to use for years to come. 

A homeowner in Maple Lake, MN reached out to DBS regarding the unfinished basement of their home. They wanted to transform that space into a more warm, safe, and comfortable living environment. A Design Specialist from DBS went out and provided a free, no-obligation for the basement finishing project. It was determined that this basement would have it all -- new flooring, stairs, wall panels, and an updated bathroom finish. These were just a few of the main components to help create a new and improved space for the homeowners. 

The homeowner of this home purchased the property a few years ago and unfortunately, the basement began leaking in the area that had been finished. Frustrated with stains that had appeared in the basement carpeting from water damage, they reached out to DBS in hopes of finding a solution.

Design Specialist Rich Johnsen went out to the property to conduct a free no-obligation estimate of the issue. Upon completion of a thorough inspection, he noted to the owners that extensive water damage had been done, but DBS had solutions that could effectively waterproof their basement.

Carpenter Brandon Wollin installed the project with his team and together they installed a WaterGuard® drainage system to help divert to the TripleSafe™ sump pump they also had installed. In addition to the new draining system and sump pump, they also installed CleanSpace®, a waterproof poly material that is applied over walls. CleanSpace® will assist in directing water behind the material down into WaterGuard® drains, and the drains will carry water to the TripleSafe™ sump pump to be expelled out and away from the home through an exterior discharge line.

After completing the project, the home has been effectively waterproofed, and the homeowner can now relax comfortably in their home knowing that their home is safe and dry.

These Pelican Rapids, MN homeowners wanted to make better use of their 900 square-ft. basement. They recently had a waterproofing system installed and were ready to take the final step in finishing their basement space. 

DBS Total Basement Finishing Design Specialist Denny Meintz visited the home and provided a free, no-obligation estimate for the basement finishing project, keeping in mind the family's vision for the space.  It was determined that ZenWall™ Paneling would be installed along the perimeter in the basement, along with a finished linen ceiling, and recessed lighting. DBS Carpenter Jason Petrella and crew successfully performed some demolition, built-out an additional wall and room divider, successfully completing all finishes necessary. 

This family now has a beautiful, custom addition to their home to enjoy!

These Saint Paul, MN homeowners wanted to make better use of their basement. Living in an older house in Saint Paul, they were interested in our system because of its added insulation and water-resistant qualities. 

DBS Design Specialist Henrik Makitalo visited the home and provided a free, no-obligation estimate for the basement finishing project, keeping in mind the family's vision for the space. It was determined that EverLast™ Basement Wall Panels would be installed along the perimeter in the basement, along with MillCreek Flooring™, and recessed lighting.

A DBS Carpenter and crew successfully performed some demolition, as well as finished the stairway, and ceiling. They then installed the products mentioned above, completing base electrical, and installing outlets, switches, and jacks. 

This family now has a beautiful, custom addition to their home to enjoy.

Homeowners in Rochester, MN wanted to invest in their home and gain more space by finishing their basement. After learning about DBS and our water and mold resistant basement finishing products, they reached out to us to schedule an estimate for the work. 

Our Basement Finishing Sales Manager Denny Meints was the Design Specialists for this project. He visited the home and provided a free, no-obligation estimate for this basement finishing project. After a close inspection and thorough consultation with the homeowner, Denny created a custom design for a finished basement.

The DBS team of expert carpenters installed our water resistant products, as well as completed base electrical; installing outlets, switches, jacks, lighting, and other finishes. The homeowners chose MillCreek Flooring™, a scratch resistant and moisture-proof flooring, in our mahogany color. Our team also installed our EverLast™ wall panels and ceiling panels with recessed can lighting. 

The owners opted to replace a half bathroom as well. We worked with the homeowners to install the design and materials that worked best for their space. 

The homeowners were thrilled with our work and now have a fully-finished basement to enjoy!

Homeowners in White Bear Lake, MN wanted to invest in their home and gain more space by finishing their basement. Occasionally, the basement would collect water so after learning about DBS and our water and mold resistant basement finishing products, they reached out to us to schedule an estimate for the work. 

Our Basement Finishing Sales Manager Denny Meints was the Design Specialist for this project. He visited the home and provided a free, no-obligation estimate for this basement finishing project. After a close inspection and thorough consultation with the homeowner, Denny created a custom design for a finished basement, featuring a laundry room and plenty of family space.

The DBS team of expert carpenters installed our water-resistant products, as well as completed base electrical; installing outlets, switches, jacks, lighting, and other finishes. The homeowners chose MillCreek Flooring™, a scratch-resistant and moisture-proof flooring, in our walnut color. Our team also installed our EverLast™ wall panels and ceiling panels with recessed can lights. 

The homeowners were thrilled with our work and now have a fully-finished basement to enjoy!

Homeowners in Spring Lake Park, MN wanted to transform their partially-finished basement. Knowing that basements are prone to water leaks, they were interested in learning more about our moisture and mildew resistant basement finishing materials. After doing research online, they reached out to DBS for a free, no-obligation estimate for their basement project. 

Our Basement Finishing expert Jason Swanson was the Design Specialist for this project. He visited the home, consulted with the homeowners and created a custom plan for this basement finishing project, including a re-design of the bedroom spaces, as well as a customer wet bar. 

The DBS team of expert carpenters began this project by removing some of the existing drywall and carpeting. From there, they installed our water resistant products, as well as completed base electrical; installing outlets, switches, jacks, lighting, and other finishes. The homeowners chose MillCreek Flooring™, a scratch resistant and moisture-proof flooring, in our mahogany color.

These homeowners were happy with our work and now have more space to dedicate to their active family!

Homeowners in Minneapolis, MN wanted to transform their finished basement. Because their basement was prone to occasional leaks and mold, they were interested in learning more about our moisture and mildew-resistant basement finishing materials. After doing research online, they reached out to DBS for a free, no-obligation estimate for their basement project. 

Our Basement Finishing expert Jason Swanson was the Design Specialist for this project. He visited the home, consulted with the homeowners, and created a custom plan for this basement finishing project and drywall restoration for the damaged portions of the basement. 

The DBS team of expert carpenters began this project by removing some of the existing drywall and carpeting. From there, they installed our water-resistant products, as well as completed base electrical; installing outlets, switches, jacks, lighting, and other finishes. The homeowners chose MillCreek Flooring™, a scratch-resistant and moisture-proof flooring, in our natural oak color. Our team also installed our EverLast™ wall panels and ceiling panels with recessed can lights. 

These homeowners were happy with our work and now have more space to dedicate to their active family!

Homeowners in Saint Paul, MN wanted to capitalize on the square footage in the basement. Their hope was to have living space as well as a family room for larger gatherings. Because they had some issues with water leaking in the past, they reached out to DBS to learn more about our water-resistant basement finishing materials. 

DBS Sales Manager Denny Meints visited the home for a free, no-obligation estimate and came up with a custom plan that would cover this family's needs.  DBS Carpenter Donny Whiting lead the install on this basement finishing project. They began by removing existing drywall and flooring. They installed our ultra-durable, scratch-resistant EverLast™ flooring throughout the basement. 

The team also installed EverLast™ wall panels - the insulated version lined the outside walls and uninsulated for the inner walls. These wall panels are hung via a metal framing system, making them incredibly durable and stronger than drywall. 

These owners now have a healthy, safe, and comfortable basement to use for years to come.