Evan LaFontaine

This homeowner in Winter, WI was facing problems in their homes such as critters and water intrusion. They needed a new solution, so they reached out to DBS for professional help.

Design Specialist Jake Gilmer assisted the homeowner in a free, no-obligation estimate. After a thorough inspection, it was decided that SprayFoam insulation would be the best solution for the home's needs.

Foreman Evan LaFontaine led the installation of this project with help from a team. Together, the team used SprayFoam insulation to air seal the area and insulate the home. This insulation is water-resistant and provides a barrier to moisture to keep the home both warm and dry. As for the critters, SprayFoam is pest resistant and will keep them out of the home. 

This homeowner can now relax knowing their home is warm, dry, and safe from pests.

This homeowner in Amery, WI wanted to keep up the appearance of their home, as well as fix the tripping hazards around the outside of the house. 

A DBS Design Specialist assisted this homeowner with a free, no-obligation estimate. After a careful inspection, a quote was provided for our Concrete Lifting and Leveling Services.

Foreman Evan LaFontaine led the installation of this project with help from a team. The team began by lifting the concrete with our PolyLevel® Foam. This foam is injected under the slab where it expands and hardens. Then, our NexusPro® Sealant is applied to the cracks and joints of the concrete.

This homeowner can now relax knowing the appearance and safety of their home are intact. 

These homeowners in Inver Grove Heights, MN wanted to address their sinking concrete inside their home. They wanted the area raised to close the gap that had appeared.

Design Specialist Andy Bost assisted the homeowners in a free, no-obligation estimate. After inspecting the area, Andy recommended our PolyLevel® Foam and NexusPro® Sealant. 

Foreman Evan LaFontaine led the installation of this project. The foam is injected under the concrete and then expands and hardens to lift and stabilize the section. Then the sealant is applied to the cracks and joints.

These homeowners can now relax knowing the problem has a DBS solution.

This home in Inver Grove Heights, MN had fallen victim to cracks and uneven concrete. These cracks had become serious tripping hazards and a major inconvenience. The homeowners trusted DBS to provide a permanent and professional solution.

Design Specialist Henry Jungbauer visited the home in order to conduct a free, no-obligation estimate. After the inspection, Henry provided a quote for our PolyLevel® foam and NexusPro® sealant. 

Foreman Evan LaFontaine led the installation of this project. Small holes are drilled into the concrete and the PolyLevel® foam is injected underneath. This foam lifts and levels the slab. Then, the sealant is used to protect the joints from weather conditions and water intrusion.

This home now has level, secure concrete thanks to DBS.

This homeowner in Saint Paul, MN wanted to lift and level the garage slab in order to fill the voids and smooth out the surface. They needed a permanent solution, so they turned to DBS for help.

Design Specialist Grant Faris assisted the homeowner in a free, no-obligation estimate in order to find the best solution for the home's needs. After a careful inspection, a quote was provided and PolyLevel® Foam was recommended, along with NexusPro® Sealant. 

Foreman Evan LaFontaine led a team in the installation. The team drilled small holes into the sunken slab and injected the PolyLevel® foam. This foam expands and hardens which results in the lifting and stabilizing of the concrete. After the slab is level once again, the NexusPro® sealant is used to fill any cracks and voids to create a smooth, even finish.

This homeowner can now enjoy their smooth garage, and not have to worry about cracks ruining their home.

This homeowner in Saint Paul, MN was hoping to finish their basement in order to create more living areas in the home. However, before being able to do so, they needed to address the water issues the home was facing. 

Design Specialist Nicholas Corbin assisted the homeowner in a free, no-obligation estimate in order to find the perfect solution for the home's needs. After a careful inspection, it was decided that our WaterGuard® Drain System would be the best option. 

Foreman Evan LaFontaine led the installation of this project along with a crew. Together, the team created trenches along the perimeter of the basement and installed the drain lines within. These drains collect water before it has the chance to enter the home and transports it to a sump pump to be expelled from the home. The drain lines are covered with new concrete to create a flush, clean look.

This homeowner can now move ahead with their home renovation projects. 

This home in Superior, WI was facing issues within the crawl space. Moisture and water intrusion were allowing mold growth to take place. The floors inside the home were also very cold during the winter months. Needing a professional and permanent solution, they reached out to DBS for help. 

Design Specialist Henry Jungbauer assisted the homeowners in a free, no-obligation estimate to find the perfect solution for their home. After this thorough inspection, Henry recommended the homeowners have SprayFoam insulation installed.

Evan Lafontaine led the installation of this project along with a partner. Together, the duo removed the old batting insulation in order to expose any holes or cracks. The SprayFoam insulation acts as a sealant and will air seal these exposed cracks for a more effective solution. This SprayFoam is also water-resistant, making it extremely hard for moisture to enter space and contribute to mold growth.

These homeowners can now relax in their warm, mold-free homes thanks to DBS.

This homeowner in Superior, WI wanted to encapsulate their crawl space in order to transform it into a storage area. However, first, they need to address moisture and cold air issues.

A DBS Design Specialist visited the home and conducted a free, no-obligation estimate in order to find the perfect solutions for this home's needs. After a careful inspection, the Design Specialist provided a quote and recommended encapsulation, just as the owner was wanting!

Foreman Evan LaFontaine led the installation of this project, along with a team. Together, the team removed the old batting insulation, installed drainage matting to help get rid of water intrusion, and installed the CleanSpace® water vapor barrier. The barrier will keep the space dry and clean, making it the perfect storage area. Finally, the team used SprayFoam to insulate the space and air seal any unwanted cracks and holes. 

This homeowner can now relax in their comfortable, clutter-free home. 

This homeowner in Superior, WI got work done to lift and level their concrete, but they needed to fill in the joints and cracks to finish the job. They reached out to DBS for help.

A DBS Design Specialist conducted a free, no-obligation estimate for the homeowner. After a careful inspection, our NexusPro® Sealant was recommended.

Foreman Evan LaFontaine led the installation of this project. This sealant protects the work from weather elements. It will help by making the concrete work more resistant to movement in the future and creates a smooth finish.

This homeowner can now enjoy their new, smooth concrete.

The owner of this home in Two Harbors, MN was concerned about mold growth in their crawl space. They also had issues with rodents and wanted a solution to their issue as soon as possible. The owner reached out to DBS in hopes of finding a solution.

Design Specialist Henry Jungbauer went to the home to conduct a free no-obligation estimate for the homeowner. After a thorough inspection, he advised the owner about DBS insulation solutions that would solve their issues.

Foreman Evan LaFontaine led the installation of the project with assistance from a team. Together they installed drainage matting in the crawl space to help with water flow underneath the layers of insulation. Then they laid down panels of TerraBlock™ foam insulation to protect the area against frost build-up. Finally, they sealed off the ground with the CleanSpace® vapor barrier. On the walls, the crew installed panels of SilverGlo™ rigid foam insulation and air sealed in between the panels with ZypFoam™. To finalize the project, the crew sprayed waterproof polyurethane foam insulation into the rim joists to air seal the crawl space.

Now that the crawl space has been thoroughly insulated, the homeowner will experience warmer floors and lower heating bills. They can relax comfortably knowing that their crawl space will stay drier and promote healthy living conditions.

This homeowner in Circle Pines, MN wanted to address their cold home. A lack of insulation was causing the home to not be able to retain heat in the cold months.

A DBS Design Specialist assisted the homeowner in a free, no-obligation estimate. After a careful inspection, a quote was provided for SprayFoam insulation.

Foreman Evan LaFontaine led the installation of this project. The team applied a thick level of SprayFoam insulation to the bottom of the cold area of the home. This will air seal any holes or cracks letting in unwanted airflow. 

This homeowner can now relax knowing their home is warm and healthy. 

This home in Minneapolis, MN was in desperate need of concrete repair. Tripping hazards had become a prominent problem, so the owner trusted DBS to help.

Design Specialist Justin Mundahl visited the home in order to conduct a free, no-obligation estimate. After the inspection, Justin recommended our Concrete Lifting and Leveling Solution. 

Foreman Evan LaFontaine led the installation of this project. Small holes are drilled in order to inject the PolyLevel® foam underneath the concrete. This foam expands and hardens to lift and level the area. Then our NexusPro® sealant is applied in order to protect the joints and the new, level area.

This homeowner can now relax knowing their home is a hazard-free space.

These homeowners in Minneapolis, MN reached out to DBS for their concrete repair needs. The concrete had sunk and needed to be addressed with a professional solution.

A DBS Design Specialist visited the home in order to conduct a free, no-obligation estimate. After the inspection, our Concrete Lifting and Leveling Solution was recommended. 

Foreman Evan LaFontaine led the installation of this project. The project began with small holes begin drilled into the concrete in order to inject the PolyLevel® foam underneath. This foam expands and hardens to lift and level the area. Then our NexusPro® sealant is applied in order to protect the joints and the new, level area.

These homeowners can now relax knowing their concrete is lifted and leveled.

This family in Minneapolis, MN watched their driveway and concrete settle over time. They were concerned about tripping hazards as well as water runoff from the never slabs. Looking for a solution to their concrete issues they contacted DBS for a free, no-obligation estimate for our concrete lifting and leveling service. 

DBS Concrete Repair Design Specialist Justin Mundahl visited the home and provided a thorough estimate for the concrete repair work. DBS Concrete Repair Foreman Evan Lafontaine and his crew installed PolyLevel® to fill the voids beneath the slab and raise it back to level. This 2-part expanding foam expands upon contact with the soil and hardens as it cures. 

After the slab was leveled, the cracks were repaired with NexusPro®. This silicone solution is designed to adhere to cracks and gaps in the concrete throughout all types of weather.

This homeowner in New Prague, MN wanted to address the lifting and cracks in their home's concrete. They reached out to DBS for permanent and professional help.

Design Specialist Justin Mundahl assisted the owner in a free, no-obligation estimate. After a careful inspection, our Concrete Lifting Leveling Services were offered.

Foreman Evan LaFontaine led the installation of this project. PolyLevel® Foam was used to lift the concrete slabs back into a level position, and NexusPro® Sealant was used to fill the cracks and joints to protect them and prevent damage.

This homeowner can now enjoy their smooth, level surface.

This homeowner in Hopkins, MN wanted to address their uneven staircase outside of their home. The concrete had settled and needed to be evened out to combat the tripping hazards.

Design Specialist Grant Faris assisted the owner by conducting a free, no-obligation estimate. After a thorough inspection, Grant recommended our PolyLevel® Concrete Solution.

Foreman Evan LaFontaine led the installation of this project. Evan began by drilling holes in the concrete and injected the foam under the slab. This foam expands and hardens in order to lift and stabilize the concrete.

This homeowner can now relax knowing the needs have been properly addressed.

These homeowners in Duluth, MN noticed a musty smell coming from their crawl space, as well as cold floors in the winter months. They wanted to address these problems, so they trusted DBS with their home's needs.

Design Specialist Austin Burley assisted the homeowners with a free, no-obligation estimate in order to find the right solution for their homes. After a careful inspection, Austin provided a quote and recommended using SprayFoam to insulate their crawl space. 

Foreman Evan LaFontaine led the installation of this project along with a team. Together, the team used Dr. Energy Saver's SprayFoam to insulate the area. SprayFoam is a very efficient insulator and is able to air seal any holes or cracks that are allowing unwanted airflow in or out of the space. It is also moisture resistant, making sure the space will stay dry and free of the musty smell. Finally, the team installed the CleanSpace® vapor barrier on the floor of the crawl space to transform it into a clean, dry storage area for the homeowners.

These homeowners can now enjoy their home year-round and do not have to worry about moisture causing problems.

This home in Duluth, MN was experiencing water damage in the attic. The water damage needed to be addressed and then DBS would install new insulation to prevent more freezing and thawing of water.

Design Specialist Henry Jungbauer conducted a free, no-obligation estimate for the homeowner. After a thorough inspection, Henry recommended SprayFoam insulation to air seal the space and create a moisture barrier. 

Foreman Evan LaFontaine led a team in the installation of this project. Wet insulation was removed in order to find any cracks and holes. SprayFoam was used inserted into the walls and roof of the home to air seal the cracks and to create effective insulation and an efficient water barrier.

This homeowner can now relax knowing their home is healthy and happy. 

The owner of this cabin in Palisade, MN decided to reach out to DBS after seeing an ad online for our Crawl Space Encapsulation Service.

Design Specialist Austin Burley went to the home to conduct a free no-obligation estimate for the homeowner. After a thorough inspection, Austin provided education on our Crawl Space Encapsulation Service to our customer and generated a free quote customized to their cabin's needs.

Foreman Evan LaFontaine led the installation of this project with assistance from a crew. Together they installed dimpled drainage matting to assist water flow in the crawl space. On top of that, they installed panels of TerraBlock™ insulation to provide a proper frost barrier and finished the encapsulation process by installing CleanSpace® water vapor barrier. To finish the insulation aspect of the project, the crew sprayed the vertical walls with our closed-cell polyurethane spray foam insulation.

Now that the crawl space has been properly insulated and waterproofed, the cabin owner will be able to enjoy warmer living spaces without having to pay higher heating bills!

A cabin owner in Side Lake, MN wanted to repair the floor in their boathouse. Shifting soils and washouts have caused the lakeside concrete slab to settle over time. In search of a permanent solution, they reached out to DBS for a free, no-obligation estimate for our concrete lifting and leveling service.

DBS Design Specialist Kelly Dusek is an expert in Concrete Repair and visited the cabin to provide an inspection. After taking thorough measurements, he designed a solution that would fill the voids beneath the concrete and raise the slabs back to a level position.

DBS Concrete Repair Foreman Evan Lafontaine led a crew that completed this cabin boathouse project. They began by drilling pea-sized holes into the target areas of the concrete. From there, they used a pressurized hose to inject our 2-part solution called PolyLevel® beneath the slab. This expanding foam's lightweight formula is designed to lift concrete without adding extra weight to the soil beneath and causing more settling. The foam hardens and it cures to provide a durable, sustainable fix that won't wash away over time. The cracks were filled with NexusPro®, a flexible silicone solution.

This cabin owner was happy with the work done and is relieved to have a stable and level slab once again. 

The owner of this home in Side Lake, MN reached out to DBS with concerns about their cracked and sunken garage slab.

Design Specialist Henry Jungbauer went to the home to conduct a free no-obligation estimate for the homeowner. After a thorough inspection, Henry generated a quote for our concrete lifting and leveling services.

Foreman Evan LaFontaine led the installation of this project with assistance from a crew. Together they injected Polylevel® beneath the concrete slabs to level the space.

Now that the garage slab has been leveled out, the homeowner can relax with peace of mind and focus on other home improvement projects.

This homeowner in Grand Rapids, MN needed assistance stopping the cold air from intruding in their home. They needed professional help, so they reached out to DBS.

A DBS Design Specialist visited the home to conduct a free, no-obligation estimate. After a careful inspection, a quote was provided and it was decided that SprayFoam insulation would be the best option for the home's needs.

Foreman Evan LaFontaine led a team in the installation of this project. Working together, the team used Dr. Energy Saver SprayFoam technology to insulate the space. This SprayFoam insulation also works as a sealant, air sealing any holes or cracks allowing unwanted air in or out of the home. 

This homeowner can now relax knowing their home will be protected against unwanted air intrusion. 

The owner of this home in Effie, MN noticed bowing walls in their basement and was concerned about them caving in. The homeowner had just recently purchased the property last year and a stud broke through the drywall a few months later. Looking for a solution, the homeowner reached out to DBS.

Design Specialist, Henrik Makitalo led the installation of this project with help from a crew. Together they installed 21 GeoLock™ Wall Anchors to permanently stabilizer the walls in the basement. GeoLock™ anchors are installed by first excavating a small hole into the ground outside of the home-- the distance away from the foundation depends on the strength of the soil. Then holes are drilled into the walls from the interior to drill a steel rod out to the excavation site. A GeoLock™ wall anchor plate is installed over the rod in the trench and secured with a bolt, and the same is done on the basement wall side. The bolt is tightened in an effort to help straighten the wall and can be tightened again during dry seasons. 

Now that the wall has been permanently stabilized, the homeowner can relax comfortably in their new home without worrying that their basement walls are going to cave in.

This cabin in Hackensack, MN was struggling with its foundation. The shoreline is beginning to recede and as result, the foundation was sinking into the soil. Looking for a permanent stabilization solution to keep the lake home in the family, the owner reached out to DBS. 

Design Specialist James Miller went out to the cabin to conduct a free no-obligation estimate. After a thorough inspection, James advised the owners that DBS had a stabilization solution called the SmartJack®System that would support the cabin. He also recommended DBS Crawl Space Encapsulation services to waterproof the area.

Foreman Evan LaFontaine led the installation of this project with help from a crew. Together they installed 3 SmartJack® supports and encapsulated the crawlspace in 3 layers. The first layer installed was a dimpled drainage matting to assist the flow of water beneath the insulation. Then they installed panels of TerraBlock™ foam insulation to protect the crawl space from frost. The last step in the encapsulation process was encasing the area in a layer of CleanSpace® water vapor barrier.

Now that the crawlspace has been permanently stabilized and encapsulated, the cabin owner will be able to get much more use out of their lake home retreat all year round without worry that it will sink into the lake.