Ashland's Premier Foundation Repair, Concrete Lifting & Leveling Contractor

We installed our PowerBrace® System along the walls of this basement in Ashland, WI. One of our Design Specialists gave the homeowner a free no-obligation estimate after a thorough inspection. One of our crews installed our system in the basement to permanently stabilize the foundation walls.

This home in Ashland, WI was suffering form insufficient insulation. The owner recently purchased the house and realized the crawl space needed insulation to prevent cold floors in the home and to lower their heating bill. They reached out to DBS for a professional and permanent solution.

Design Specialist Zach Guilliams went out to the home to assist the owner with a free, no-obligation estimate. After a careful inspection, our SprayFoam insulation was recommended.

Foreman Nicholas Woods and his team led the installation of this project. Together, the team used to the SprayFoam insulation to air seal all holes and cracks in the foundation. This prevents any cold air from entering the space and allows the home to keep the warm are inside.

If you are experiencing similar issues, reach out to DBS today!

The new owners of this 150-year-old cabin in Ashland, WI were looking for a way to permanently lift and stabilize the cabin. Wanting the job down professionally, they reached out to DBS. Our Design Specialist, James Miller, visited the cabin and provided the owners with a free, no-obligation estimate. James recommended the installation of helical piers along the cabin's foundation to permanently lift and stabilize the cabin. DBS Foreman, Nate Simonson, and his crew mate, Adam Upton, then installed 20 helical piers around the cabin to lift and stabilize the cabin. These helical are driven into the ground using hydraulic pressure. Once the pier reaches solid, stable bedrock, the pressure pushes against the ground and causes the piers to stabilize the structure. The new cabin owners can now have a piece of mind knowing the cabin is permanently stabilized.

Owners of this recently purchased home in Ashland, WI knew they would need to eventually insulate it. After enduring one winter, they began looking for a solution for the uncomfortable conditions in their home. After learning about our company via their local newspaper, they called us to schedule a free, no-obligation estimate.

Our Dr. Energy Saver® Design Specialist Jacob Nustad-Peluso went to the home and provided a free, no-obligation estimate for this family. After inspecting the property and conducting an energy audit, it was determined that spray foam insulation at the rim joists in the basement, and blown-in insulation in the attic were necessary to effectively insulate the space.

Our production crew first removed the existing insulation in the attic. They then sealed the gaps in building material and spaces surrounding the attic ducts with a layer of closed-cell spray foam. Using SilverGlo™, a rigid foam insulation that is infused with graphite, our team constructed knee walls. This allows added protection to the roof deck from outside air. From there, they used our TruSoft™ cellulose to blow into the space. TruSoft™ has a higher R-value than fiberglass and other cellulose materials. 

Sealing this attic will drastically reduce the rate of cold air entering the home and warm air escaping the home - in short - lower energy bills and more comfortable conditions.

These homeowners in Ashland, Wisconsin reached out to DBS for help keeping their 1800's built home healthy, safe, and comfortable. Their crawl space was problematic with cracked and bowing walls.

DBS Design Specialist Henrik Makitalo went to the home and provided a free, no-obligation estimate for the work. This crawl space needed to have the exposed earth flooring leveled so PowerBrace™ wall support beams can be installed and permanently stabilize this failing foundation. This home was repaired by DBS Foreman Tony Leske and his production crew.

This home is now healthy, safe, and comfortable! 

This Ashland, WI home had a dirt crawl space that was prone to water. Tired of musty smells, and inconsistent temperatures in the rest of the home, this homeowner reached out to us after meeting us at the Ashland Home Show. 

A DBS Design Specialist visited the home for a free inspection and no-obligation estimate for the work. To combat this problem, encapsulating the space entirely was the best option.

CleanSpace® drainage matting, and a protective vapor barrier were laid down to seal the dirt floor. TerraBlock™ and closed-cell spray foam insulation were used to help regulate temperature in the space, which will in turn make the home more energy-efficient.

The homeowner was pleased with the done work and now has a more safe and comfortable home to enjoy!

Homeowners in Ashland, WI were experiencing significant wall failure in their home's basement. After learning about DBS on local radio, they reached out to us for a permanent solution. 

DBS Director of Sales Royce Bunn visited the home for a free, no-obligation estimate and provided a solution to save the home's foundation. First, Royce recommended 7 GeoLock® Wall Anchor System to correct the cracked and bowing walls. GeoLock® Wall Anchors stabilize foundation walls by connecting two steel plates together with a galvanized steel rod. The rods are tightened over time, pulling walls back into their original position. 

DBS Foreman Casey Healy and his production crew installed the GeoLock® Wall Anchor System as well as 17 PowerBrace™ support beams in total.

These basement walls are no longer in danger of collapsing and this home once again has a safe and stable foundation. 

This particular Ashland, WI homeowner was experiencing cold drafty areas over their crawlspace. Especially in their food pantry. They were done dealing with how uncomfortable they were feeling in their home and decided to call the experts at DBS. Upon calling, the homeowner was greeted by the receptionist, Kristin Kramer, who connected them with Emily Kincheloe, our Appointment Center Representative. Emily, swiftly scheduled an appointment with System Design Specialist, Henrik Makitalo. When Henrik arrived at the customer's home, he provided a thorough inspection of the crawlspace along with a free, no-obligation estimate for repairs needed. The customer decided to move forward with the recommended crawlspace encapsulation.  Foreman, Kevin Steffy and his crew were able to install the needed CleanSpace dimple matting as well as the CleanSpace encapsulation material. Additionally, the crew installed two new basement windows. After this project was completed, the homeowner was happy to report that their home was much more comfortable. They could rest easy knowing that their home was protected. 

This Ashland homeowner was concerned about her basement wall which had shifted over time. There was also some water issues that had been temporarily fixed in the past. After searching for the best company to solve these problems, this homeowner contacted DBS. Following a brief phone call with the DSB office staff, an appointment was made to have System Design Specialist, Royce Bunn make a trip out to the home for a free no obligation estimate. After a thorough inspection, Royce provided the homeowner the best possible solution for her basement. Royce explained that installing Geo Locks would aid the stabilization of the wall in highest concern and power braces along with joint reinforcements would secure the rest. A full waterproofing service with a sump pump installation would solve the homeowner's problems and leave them without worry.

Our entire waterproofing system includes CleanSpace matting along the walls, a drain tile under the floor, and one of our network's patented sump pumps. Each element of this system plays an important role and we encourage our customers to utilize our complete solutions, however, there are times when we are flexible with customers who wish to install a system in multiple different stages. By doing so we are able to reduce some of the stress that the customer is facing and start them in the right direction to fully waterproofing their basement. In this situation, the homeowner wished to install the whole system, but they were unable to do so at the time. By installing the first step of the system, the drain tile, in their basement we are able to reduce the problem that is immediately troubling them while we move the basement toward being completely waterproofed in the future. This drain tile along the footing of the basement helps direct water around the outside of the home into the drain tile itself where it flows into the existing sump pump. When we add on to this system in the future we will be installing our CleanSpace waterproofing membrane along the walls which directs water from the walls down into the drain tile. We would also recommend replacing the existing sump pump with our TripleSafe sump pump which has much better pumping capabilities and a built-in battery backup pump among other features.