DBS Before & After Photos

This garage in Saint Paul, MN was in bad condition. The cracks were allowing the slab of concrete to lift and become unlevel. Needing a permanent solution, the homeowner trusted DBS to help.

Design Specialist Henrik Makitalo conducted a free, no-obligation estimate for the homeowner. After inspecting the area in need of help, he recommended our NexusPro® sealant solution and PolyLevel® foam. 

Foreman Dustin Behning led the installation of this project, along with his team. Together, the team used the sealant to cover and fill the cracks around the concrete slab. This creates a smooth finish that gets rid of the cracks and prevents further damage. The team also drilled small holes to insert the PolyLevel® foam under the slab to lift them back into a level position. Once the foam is done expanding, the extra foam is cleaned up and the holes are sealed. 

this homeowner can now enjoy and use their smooth, bump-free garage. 

These homeowners in Saint Paul, MN noticed their garage concrete slab was settling into the ground, creating an uneven surface. Wanting to get rid of the tripping hazards, they reached out to DBS for help. 

Design Specialist Henrik Makitalo assisted the owners in a free, no-obligation estimate. After a close inspection, Henrik provided a quote and recommended our PolyLevel® foam, as well as our NexusPro® sealant.

A DBS Foreman led the installation of this project, along with a team. The installation began by drilling small holes and injecting the PolyLevel® foam. Once injected, this foam expands and hardens, causing the slab to be lifted back to a level position. Next, the NexusPro® sealant is used to fill in the cracks and created a clean finish that will also prevent new damage.

This homeowner can now enjoy their healthy home!

This homeowner in Saint Paul, MN wanted to do some home renovation projects upstairs but was unable to until the support problems downstairs were addressed. Failing support beams in the basement were causing the floor above to sink and sag.

A DBS Design Specialist made a trip to the home in order to conduct a free, no-obligation estimate for the homeowner. After a careful inspection, our SmartJack® Support System was recommended.

A DBS Foreman led the installation of this project with help from a team. Together, the team installed the SmartJack® Systems in certain areas of the basement to ensure the weight of the structure was evenly distributed. These jacks are then adjusted in order to raise the floor above back to a level position.

This homeowner can now continue on with their home renovations without needing to worry about instability below. 

This home in St. Paul, MN was inspected by System Design Specialist, Henrik Makitalo. Upon his inspection, Henrik found that the home's main support beam was not properly supported. He proposed the use of our patented SmartJack® system to help secure the home's main support beam. The customer was relieved to have a plan in place to permanently stabilize his home. Foreman, Casey Healy, and his crew were tasked with installing our SmartJack® system. They poured new footings and then secured the beam with the use of SmartJacks®. 

These Eveleth, MN homeowners reached out to DBS when their floors began to sag and bow.

DBS Design Specialist Henrik Makitalo went to the property and provided a free, no-obligation estimate for the work.

A DBS Foreman and their production crew installed our SmartJack® Wall Bracing System to immediately stabilize the failing floors.

This home is now permanently stabilized and safe for the family to enjoy.